The Miboxer K1 is a 2.4GHz rotating switch panel remote that dims brightness and colour temperature on Miboxer single-colour and CCT LED lights. It comes in white (K1) or black (K1-B), sticks to the wall on a magnetic holder and runs on a CR2032 battery.
Batteries not included. Requires a CR2032 battery.
Key Features
- Short press turns the light on or off; rotating dims brightness
- Long press while the light is on switches to colour temperature; rotate to dim CCT (it leaves CCT mode after 3 seconds without use)
- Long press while the light is off enters night light mode
- 30 m control distance; one remote supports unlimited LED lights
- Magnetic holder with adhesive backing for wall mounting
Specifications
- Model: K1 (white), K1-B (black)
- Power: 3V, CR2032 battery
- Frequency: 2.4GHz RF, 2400-2483.5MHz
- Control distance: 30 m
- Working temperature: -10 to 40 °C
Pairing
To link it to a Miboxer 2.4GHz light or controller, switch the light off for 10 seconds, switch it back on, then within 3 seconds short press the SET button 3 times. The light flashes slowly 3 times when linking is done. A light that is already linked cannot be linked again until it is unlinked.
Compatibility
Miboxer lists the K1 as a compatible remote for the MLR1 and MLR2 mini controllers and the LC2-RF 2-wire controller.
The Miboxer manual is available to download on this page.